Conductive Copper Alloys
Copper is a versatile and practical material with properties that makes it conductive, corrosion resistant, ductile and solderable. It’s no small wonder that it’s affectionately called “Red Gold”. CBC Specialty Metals carries a range of copper alloys that can be provided in multiple formats.
Explore our most popular copper options here:
| Copper Alloys |
Round Bar
|
Hex Bar
|
Square Bar
|
Flat Bar
|
DWVTube |
PlumbingTube (K,L,M) |
Level Wound Coil |
Pipe
|
Coil
|
Sheet
|
Plate
|
Circles
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C101 | ||||||||||||
| C110 | ||||||||||||
| C122 |
Let our highly trained staff help you find the copper alloy that meets all of your requirements.
Contact us with questions and to find out about stock availability.
Options
Explore copper sizes, tempers, finishes, and more. Whether you're looking for standard dimensions or custom cuts, this section outlines everything you need to know about our copper products, from available alloys to packaging and delivery options.
Oxygen Free Copper has the highest conductivity of any of the copper alloys, thanks to the fact that it has had most of its oxygen removed during the forging process. This type of copper is widely used in electronics as well as manufacturing.
C101: Oxygen Free Electronic Copper:
Valued for its chemical purity more than its electrical conductivity. C101 copper is 99.9% copper with an oxygen content of 0.0005% or less. C101 copper is certified to the % amount of impurities in its composition.
C102: Oxygen Free Copper:
C102 copper is a 99.95% pure copper alloy with an oxygen content of 0.0010% or less. C102 copper is not certified to the % amount of impurities in its composition and instead strictly focuses on copper content and conductivity rating.
Industries:
- Manufacturing
- Electronics
- Widths up to 48"
1.219m - Thicknesses from 0.050” – .125”
1.27mm - 3.175mm - Annealed Temper
C110 copper is a 99.9% pure copper alloy. It has high electrical and thermal conductivity, good corrosion resistance and solderability.
C110 copper becomes ductile and soft at a red heat, making it a good material for hot working. Its inherent fabrication qualities readily permit it to be bent, soldered, peened, riveted and formed to fit almost any design specification.
Due to its properties, C110 copper is an excellent material for countless applications across the architectural and electrical sectors.
Industries:
- Architecture
- Electrical
- HVAC
- Manufacturing
- Plumbing
- Widths up to 48"
1.219m - Gauges .021” – .1875”
0.5334 - 4.762mm - Tempers DDQ – ½ Hard
- Variety of Finishes
- Widths up to 36.5”
927.09mm - Gauges .250” – .75”
6.35mm - 19.04mm - Standard Temper
- 12’ and 20’ Lengths
3.657m - 4.8767m - Outside Diameters 1”- 6”
25.4mm – 152mm - Schedule 40, Schedule 80 and Schedule 160
- Gauges from .032” – .043”
0.8128mm - 1.0921mm - Diameters from 14” – 19”
355.59mm - 482.59mm - Variety of Tempers
- Thicknesses from 3/32” to 1”
.0937” - Widths up to 8”
- Full Round Edge, Radius Corner, and Square Edge available
- Some sizes available in Tin Plated
- Diameters from 1/8” to 8”
.125” - Hard Drawn Temper
C122 Copper is a 99.9% pure copper alloy with an agreed upon amount of phosphorus which is between .015% and .040% of its composition. It has a lower conductivity rating,however it boasts a higher tensile and yield strength than other pure copper alloys.
Its composition also makes it a better candidate for cold/hot working, soldering and brazing than other grades of pure copper. Due to its properties C122 copper is the backbone of the HVAC, plumbing, refrigeration and air industries.
Industries:
- HVAC
- Manufacturing
- Plumbing
- Architecture
- Roofing
- Length: 12 feet and 20 feet
3.657m and 6.096m - Outside diameter: 0.375″ to 3″
9.525mm to 76.20mm - Annealed and hardened Tempers
- Length: 12 feet
3.657m - Outside diameter: from 1.5″ to 6″
38.10mm to 152.40mm - Hardened state
- 50 ft. spool
15.24m - Outside diameter: 0.250” to 0.875”
6.35mm to 22.22mm - Wall thickness: from 0.032” to 0.045”
0.8128mm to 1.14mm - Annealed state
- 250lb Coils Available
- Outer diameter: from 0.1875″ to 0.875″
4.76mm to 22.22mm - Wall thickness: 0.028″ to 0.045″
0.711mm to 1.14mm
- Thickness: 0.032″ to 0.043″
0.8128mm to 1.0921mm - Diameter: 14″ to 19″
355.60mm to 482.60mm - Wide variety of tempers
Need a quote or want to see the material firsthand? Select the option that best suits your needs —
whether you're ready to move forward or just exploring.